GreenWorks PS24B00, Руководство оператора

Страница: 10 / 44

8.2 START THE MACHINE
1. Install the battery pack into the machine.
2. Press the lock-out button (3).
3. Pull the trigger lock-out (1) upwards.
4. Press the trigger (2).
8.3 STOP THE MACHINE
1. Release the trigger to stop the machine.
8.4 DELIMBING A TREE
A
B
WARNING
Make sure that there is nothing or nobody in the area
where the branches fall.
• Stand opposite of the branch you will cut.
• Start to cut the higher branches.
• Then cut the lower branches.
• Cut downwards to prevent the bar from jamming.
8.5 LIMB TREE BRANCHES
Limbing is to remove the branches from a fallen tree.
A
A
B
1. Keep the larger lower branches to hold the log off
the ground.
2. Remove the small limbs in one cut.
3. Limb the branches with tension from the bottom to
up.
4. Keep the larger lower branches as a support until
the log is limbed.
9 MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
9.1 ADJUST THE CHAIN TENSION
CAUTION
Wear protective gloves if you touch the chain, bar or
areas around the chain.
1. Loosen the chain cover by turning the bar nut
counterclockwise.
10
English
EN