GreenWorks LMF413, Руководство оператора, Страница: 10 / 36

• Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an approved service center.
• Store the machine in a dry area.
• Make sure that children cannot come near the machine.
9.4 STAND THE MACHINE ON END
Figure 10.
1. Remove the grass catcher.
2. Pull and turn the handle knobs 90°.
3. Fold down the handle.
4. Turn the handle knobs 90° to lock the handle into
position.
5. Stand the machine on end and make sure that the brackets
touch the floor.
Storage Switch
The machine has a storage switch that prevents its startup in
the storage position.
It is necessary to remove the safety key and the battery pack
to prevent accidental startup or unapproved use. The storage
switch does not replace this function.
10 TROUBLESHOOTING
Problem Possible cause Solution
The handle is not
in position. The bolts are not
engaged correctly. Adjust the height
of the handle and
make sure that the
knobs and bolts
are aligned cor-
rectly.
The machine does
not start. The battery ca-
pacity is low. Charge the battery
pack.
The bail switch is
defective. Replace the bail
switch.
The battery key is
not put in. Put in the battery
key.
The machine cuts
grass unevenly. The lawn is rough. Examine the mow-
ing area.
The blade height is
not set correctly. Move the wheels
to a higher posi-
tion.
The machine does
not mulch correct-
ly. Wet grass clip-
pings attach to the
deck. Wait until the
grass dries before
mowing.
The mulch plug is
missing. Install the mulch
plug.
Problem Possible cause Solution
The machine is
hard to push. The grass is too
tall, or the blade
height is too low. Increase the blade
height.
The grass catcher
and the blade
drags in thick
grass. Empty the grass
clippings from the
grass catcher.
There is a high vi-
bration in the ma-
chine. The blade is un-
balanced and
worn. Replace the blade.
The motor shaft is
bent. 1. Stop the mo-
tor.
2. Remove the
safety key and
battery pack.
3. Disconnect the
power source.
4. Inspect for
damage.
5. Repair the ma-
chine before
you start it
again.
The machine stops
during mowing. The blade height is
too low. Increase the blade
height.
The battery pack is
out of power. Charge the battery
pack.
The grass clip-
pings attach to the
deck or the blade. Remove the bat-
tery pack and
check the deck.
Operation temper-
ature of the ma-
chine is too high. Cool the machine.
* If you cannot find the solution to these problems, go to the
service center.
11 TECHNICAL DATA
Voltage 40 V
No load speed 2800 RPM
Deck size 21"
Height adjustments 1 3/8 - 3 3/4” (3.5 - 9.5 cm)
Functions 3-in-1 Mulch & Rear Bag &
Side Discharge
Weight (without battery
pack) 57.32 lbs (26 kg)
Battery model BAF705 and other BAF ser-
ies
11
English
EN