3
PROPOSITION 65
WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
4
SYMBOLS ON THE MACHINE
You may find the below symbols on the machine. Please
study them and learn their definitions. Correct interpretation
of these symbols allow you to operate the tool safely.
Symbol
Explanation
Class II
For indoor use only
Before charging, read the instructions
Fuse
5
RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
BOL
SIGNAL
MEANING
DANGER
Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.
SYM-
BOL
SIGNAL
MEANING
WARNING
Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.
CAUTION
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
CAUTION
(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.
6
OPERATION
6.1
CHARGE PROCEDURE
NOTE
Before use charge the battery pack fully to make sure that
the battery pack can get the maximum run time. This battery
pack does not have a memory. You can charge it all the
time.
1. Connect the plug of charger (2) to an AC power outlet.
2. Put the battery pack (1) into the charger (2).
This is a diagnostic charger. The Charger LED Light (3)
illuminates in a specified order to show the current battery
status. They are as follows:
For charger: CAM811
2
1
3
For charger: CAM803/ CAM801
5
English
EN
Содержание CAM811
Страница 2: ......
