manualshive.com logo in svg

GreenWorks 5100744, Руководство оператора, Страница: 25 / 30

Поделиться
Скачать
GreenWorks 5100744 Скачать руководство пользователя страница 25

25

TROUBLESHOOTING

PROBLEM

Output pressure varies 

high and low. (contin-

ued)

Unit does not reach

high pressure.

Pump is noisy

Water leaks from pump 

Oil is dripping

Spray wand, extension, 

or nozzle leaks.

Garden hose connection 

leaks.

POSSIBLE CAUSE

Discharge nozzle is ob-

structed.

nozzle.

Diameter of garden hose is 

too small.

Detergent bottle or suction 

tube not properly connected.

Detergent is too thick.

Filter on detergent suction 

tube is clogged.

Damaged or clogged deter-

gent suction tube.

Discharge nozzle is ob-

structed.

Pump is sucking air

Water seals are damaged or 

worn.

Oil seals are damaged or 

worn.

Broken o-ring or plastic insert.

Missing/worn rubber washer.

SOLUTION

Blow out or remove debris with a 

Run distilled vinegar through 

detergent tank.

Add more detergent.

Check connections.

Dilute detergent.

remove build-up.

Remove obstruction or replace 

detergent suction tube.

Blow out or remove debris with a 

airtight. Turn off machine and 

purge pump by squeezing trigger 

emerges through the nozzle.

warm water.

Call the Toll-Free Hotline

Call the Toll-Free Hotline

Insert new washer.

Call the Toll-Free Hotline.

Содержание 5100744































Отзывы:

Нет отзывов