GreenWorks 5100744, Руководство оператора, Страница: 21 / 30

21
MAINTENANCE
W A R N I N G
When servicing, use only identical replacement parts.Use of any other parts may create a hazard
or cause product damage..
W A R N I N G
Always wear eye protection marked to comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes, resulting in possible serious injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
W A R N I N G
Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may
result in serious personal injury.
Only the parts shown on the parts list are intended to be repaired or replaced by the customer.
All other parts should be replaced at an authorized service center.
NOZZLE MAINTENANCE
(See Figure 15.)
Excessive pump pressure (a pulsing sensation felt while squeezing the trigger) may be the result
of a clogged or dirty nozzle.
Fig. 15