Maintenance and Cleaning
For safe and proper working, always keep the
machine and ventilation slots clean.
Clean the application tool, the tool holder, the power
tool’s ventilations slots, and the battery’s ventilation
slots each time after using.
Transport
The contained lithium ion batteries are subject to the
Dangerous Goods Legislation requirements. The user
can transport the batteries by road without further
requirements. When being transported by third parties
(e.g.: air transport or forwarding agency), special
requirements on packaging and labelling must be
observed. For preparation of the item being shipped,
consulting an expert for hazardous material is required.
Dispatch batteries only when the housing is undamaged.
Tape or mask off open contacts and pack up the battery
in such a manner that it cannot move around in the
packaging. Please also observe possibly more detailed
national regulations.
DISPOSAL
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the retailer where
Noise/Vibration Information
assessment of exposure.
Noise and vibrational values (vector sum of three directions)
determined according to EN60745.
The vibration emission level given in this information sheet
has been measured in accordance with a standardized
test given in EN 60745 and may be used to compare one
tool with another. It may be used for a preliminary
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
working period. An estimation of the level of exposure to
vibration should also take into account the times when
the tool is switched off or when it is running but not
actually doing the job. This may sig-nificantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep hands warm, organise work
patterns.
English
6
