manualshive.com logo in svg

GreenWorks 26022, Руководство пользователя

Поделиться
Скачать
GreenWorks 26022 Скачать руководство пользователя страница 10

10

UNPACKING 

This product has been shipped completely assembled. 

• Carefully remove the product and any accessories from the box. Make sure that all items 

listed in the packing list are included. 

• Inspect the product carefully to make sure no breakage or damage occurred during shipping. 
• Do not discard the packing material until you have carefully inspected and satisfactorily 

operated the product. 

• If any parts are damaged or missing, please call 1-888-909-6757 for assistance. 

PACKING LIST 

• Snow shovel 
• Owner's Manual 

W A R N I N G

If any parts are damaged or missing, do not operate this product until the parts are replaced. 

Failure to heed this warning could result in serious personal injury. 

W A R N I N G

Do not connect to power supply until assembly is complete. Failure to comply could result in 

accidental starting and possible serious personal injury. 

W A R N I N G

Do not attempt to modify this product or create accessories not recommended for use with this 

product. Any such alteration or modification is misuse, and could result in a hazardous condition 

leading to possible serious personal injury. 

ASSEMBLY INSTRUCTIONS

Содержание 26022



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды