GreenWorks 20212, Руководство пользователя

Страница: 4 / 32

4
SAFETY INFORMATION
CAUTION! - Blade coasts after being turned off.
SPECIFIC SAFETY RULES
% ! %
! !
the wood closes in and pinches the chain in the cut. Contact at the upper portion of the tip of
! !=
result is a lightning-fast, reverse reaction which kicks the guide bar up and back toward the
operator. If the chain is pinched along the top of the guide bar, the guide bar can be driven
rapidly back toward the operator, which can cause loss of control and may result in serious
+
understanding of kickback, you can reduce or eliminate the element of surprise. Sudden
surprise contributes to accidents.
Use pole saw for cutting wood only. Do not use for cutting non-wood items.
Make sure that the area in which you are cutting is free from obstructions. Do not let the nose
of the guide bar contact a log, branch, fence, or any other obstruction while you are operating
the unit. Have a planned retreat path.
Do not grasp the exposed cutting blades or cutting edges when picking up or holding the
product.
Cut only when visibility and light are adequate for you to see clearly.
To protect yourself from electrocution, do not operate within 50' (15 m) of overhead electrical
lines.
>! !=
from falling branches, do not stand directly under the branch or limb being cut. This unit
should not be held at an angle over 60° from ground level.
Turn off the motor and make sure the cutting attachment has stopped before setting the unit
down.
Follow the sharpening and maintenance instructions for the saw chain.
*!
?@
any combination of these persons may results from one hand operation. This saw is intended
for two-handed use.
Use extreme caution when cutting small sized brush and saplings because slender material
may catch the saw chain and be whipped toward you or pull you off balance.
When cutting a limb that is under tension, be alert for spring back so that you will not be struck
= ! !! ! >
switch is off when plugging in.
Maintain product with care. Keep cutting edge sharp and clean for best performance and to
Q !!!<
cord periodically and, if damaged, have it repaired by an authorized service facility. Inspect
extension cords periodically and replace if damaged. Keep handles dry, clean, and free from
oil and grease.