15
OPERATION
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless fraction
!
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure
# # #
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
%
APPLICATIONS
You can use this product for the purposes listed below:
Basic limbing, felling, and woodcutting
Removing buttress roots
ADDING BAR AND CHAIN LUBRICANT
(See Fig. 6)
Use a lubricant that is designed for chains and chain oilers, and is formulated to perform over a
wide temperature range with no dilution required.
NOTE: The chainsaw comes from the factory with no bar and chain oil added. Level should also be
Remove oil cap.
Carefully pour the bar and chain oil into the tank.
Wipe off excess oil.
*< # ]'}
Repeat as needed.
NOTE: Do not use dirty, used or otherwise contaminated oils. Damage may occur to the bar or chain.
NOTE: It is normal for oil to seep from the saw when not in use. To prevent seepage, empty the oil tank
after each use, then run for one minute. When storing the unit for a long period of time (three months or
longer), be sure the chain is lightly lubricated. This will prevent rust on the chain and bar sprocket.
Содержание 20012
