background image

35

ENVIRONMENTALLy SAfE BATTERy DISPOSAL

The batteries used in this chainsaw's battery pack contain the following toxic and corrosive mate-

rial: LITHIUM-ION.

W A R N I N G  

                                                                                                                                          

Toxic materials must be disposed of in a specific manner in order to prevent

contamination of the environment. Before disposing of damaged or worn out Lithium-

Ion battery packs, contact your local waste disposal agency or the local Environmental 

Protection Agency for information and specific instructions. Take the batteries to a local 

recycling and/or disposal center that is certified for disposal. If the battery pack cracks 

or breaks, whether it leaks or nort, do not recharge it and do not use it. Dispose of it 

and replace it with a new battery pack.

DO NOT ATTEMPT TO REPAIR IT!

follow these instructions and to avoid damage to the environment:

• 

Cover the battery's terminals with heavy-duty adhesive tape.

• 

Do not attempt to remove or destroy any of the components of the battery pack.

• 

Do not attempt to open the battery pack.

• 

If a leak develops, the electrolytes that are released are corrosive and toxic. Do not get 

the solution in the eyes or on the skin, and do not swallow it.

• 

Do not place batteries in regular household trash.

• 

DO NOT incinerate batteries.

• 

DO NOT place batteries where they will become part of any waste landfill or municipal 

solid waste stream.

• 

Dispose of batteries at a certified recycling or disposal center.

Содержание 2000219









































Отзывы: