GreenWorks Pro CS80L00 Скачать руководство пользователя

Страница: 10 / 82

SYMBOLS

SAVE THESE INSTRUCTIONS

The following signal words and meanings are intended to explain the levels of risk associated

with this product.

DANGER

Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided,

may result in minor or moderate injury.

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may

result in property damage.

SYMBOL SIGNAL MEANING

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified

service technician. for service we suggest you return the product to your nearest

AUTHORIZED

SERVICE CENTER

for repair. When servicing, use only identical replacement parts.

W A R N I N G

• Do not use on wet ground.
• Disconnect before cleaning or changing accessories.

W A R N I N G

To avoid serious personal injury, do not attempt to use this product until you have read

this Owner’s Manual thoroughly and understand it completely. If you do not understand

the warnings and instructions in this Owner’s Manual, do not use this product.

Call the Toll-free Helpline (1-855-345-3934 ) for assistance.

W A R N I N G

The operation of any power tool can result in foreign objects being thrown into your eyes,

which can result in severe eye damage. Before operating a power tool, always wear safety

goggles, safety glasses with side shields, or a full face shield when needed. We recommend

a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side

shields. Always use eye protection that is marked to comply with ANSI Z87.1.

Содержание CS80L00



















































































Результаты поиска

Содержание CS80L00

Отзывы:

Похожие инструкции для CS80L00

Бренды по названию

Популярные бренды

GreenWorks Pro CS80L00, Руководство пользователя

Результаты поиска

Содержание CS80L00

Отзывы:

Похожие инструкции для CS80L00

Бренды по названию

Популярные бренды