English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
6
elements with a strong environmental impact; this
waste must not be disposed of as normal waste,
it must be separated and taken to specified waste
disposal centres where the material will be recycled.
Scrupulously comply with local regulations for the
disposal of waste materials after mowing.
At the time of decommissioning, do not pollute the
environment with the machine, but hand it over to a
disposal centre, in accordance with the local laws
in force
.
<5500
The maximum rotational frequency of
the spindle.
Noise value
Double-insulated construction
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
String will not advance when us-
ing the bump-feed head.
String is welded to itself.
Lubricate with silicone spray.
Not enough string on spool.
Install more string. Refer to string
replacement earlier in this manual.
String is worn too short.
Pull string while pressing line re-
lease button.
String is tangled on spool.
Remove string from spool and re-
wind. Refer to string replacement
earlier in this manual.
Grass wraps around shaft housing
and string head.
Cutting tall grass at ground level
Cut tall grass from the top down to
prevent wrapping.
Motor fails to start when switch
trigger is depressed.
Battery is not secure.
To secure the battery pack, make
sure the latch on bottom of the bat-
tery pack snaps into place.
Battery is not charged.
Charge the battery pack accord-
ing to the instructions included with
your model.
Shaft not connected completely
Make sure lower shaft is fully seat-
ed in shaft coupler on upper shaft
and secure shaft coupler.