GETTING STARTED
All of the following should be done with clean hands.
1. Remove Lead Reduction Replacement Filter from plastic wrap.
2. Soak the filter in cold tap water for 30 minutes before using.
3. Wash all parts (Except Lead Reduction Replacement Filter and pre-filter)
in warm soapy water before initial use. THE PARTS ARE NOT DISHWASHER
SAFE!
4. Rinse and dry thoroughly.
5. Once filter has soaked for 30 minutes, flush the filter under the tap for 30
seconds and shake gently.
Insist on a genuine GWF3L Greenway Lead Reduction
Replacement Filter for great tasting water!
OPERATING INSTRUCTIONS
1
2
3
4
5
6
7
STAGE 1: PREFILTER CAP
Collects and guides water into filter.
Separates large particles from water.
STAGE 2: FINE
POLYFIBER PAD
Strains large sediment from water and
slows water flow.
STAGE 3: DIRECTIONAL FLOW MEDIATOR
Directs water flow into center of filter to enhance
contact time with specialized filter media.
STAGE 4: FILTER SCREEN
Filters medium to small particulate/sediment.
STAGE 5 : MEDIA FILTER BARRIER
STAGE 6: LEAD REDUCTION MEDIA MIX
Effective in reducing lead, chlorine,
taste and odour and VOC’s.
STAGE 7: SUPERIOR MICRON POLISHING FILTER
