Leaving the Driving Seat
Park the tractor on level ground. Before leaving the driving seat, stop
the engine and make sure all moving parts are stationary. Apply brakes
and disengage all drives. Remove the ignition key.
Slopes
Take extra care when working on slopes.
Local undulations and sinkage will change the general slope. Avoid
ground conditions which will cause the tractor to slide or roll over. Apply
brakes before disengaging tractor gears. Keep the tractor completely
under control when disengaging the traction clutch. Remember that the
extra weight of the attachment will affect the balance and stability of your
tractor.
Inspect all components and hydraulic hoses for damage before using.
Do not use with faulty components.
Switch off tractor engine and operate spool valves to release hydraulic
pressure before connecting or disconnecting hoses. Never work on a
machine with tractor running or unreleased pressure in the hydraulic
system.
Never operate machine near bystanders.
WARNING
– brushes fold out to 5.4m.
Removing the Attachment from the Tractor
Lock down all of the drop legs BEFORE uncoupling the attachment from
the 3-point linkage.
REMEMBER: IT IS THE OPERATORS RESPONSIBILITY TO ALWAYS
ENSURE THAT THIS MACHINE IS IN SAFE WORKING ORDER BE-
FORE USE AND THAT CONDITIONS ARE SUITABLE FOR IT TO BE
USED WITHOUT ENDANGERING THE OPERATOR OR OTHERS.
