Uncoupling the Multi-Brush
To uncouple the Multi-Brush from the tractor, first lift the 3-point linkage,
then fully lower and securely lock down all three drop legs. Then lower
the mainframe and uncouple from the tractor.
NEVER UNCOUPLE THE MULTI-BRUSH FROM THE TRACTOR
UNLESS ALL 3 DROP LEGS ARE SECURELY LOCKED DOWN.
After Use Maintenance
Pressure-wash all debris off the brushes each time of use, this will
considerably extend brush life. However, do not point the jet closely at
the bristles. Apply a small amount of grease to the sloping ramp on
which the hydraulic ram slides. Grease all nipples weekly.
Lock the 3 stand legs in their lower position before uncoupling the
Multi-Brush from the tractor, and always store in this position with the
brushes held clear of the ground.
All GreenTek products are covered by 5 years parts and labour
warranty for commercial use, and 3 months warranty for hire
use.
This is a genuine ‘bumper to bumper’ warranty and includes
everything except components subject to fair wear and tear such as
blades, brushes, belts, bearings, drive splines etc, and damage
caused by corrosion, abuse or lack of maintenance.
