Greentek Alaska Island inox, Руководство пользователя

Страница: 8 / 28

8
switch-off time. The display will show a blinking 0, which means, that
the time programming mode was entered.
Select the automatic switch-off time using the “+” button, keeping in
mind, that the number on the display, multiplied by the 10-minut inter-
val, means the time of automatic switch-off (e.g. 1=10 min, 2=20 min,
3=30min, etc.)
With the auto switch-off timer set, confirm the setting using the tim-
er button, the display will stop blinking and will show the previously
selected speed, and the blinking dot next to the speed will show the
switch-off time. You can cancel the automatic switch-off function by
pressing the timer button again while the time is counted down.
Caution: Timer programming should be completed within 20 sesonds,
otherwise no action will be taken, and the hood will resume operation
in normal mode.
MAINTENANCE
ATTENTION! Before performing any maintenance operation, iso-
late the hood from the electrical supply by switching off at the con-
nector and removing the connector fuse.
Or if the appliance has been connected through a plug and socket, then
the plug must be removed from the socket.
Cleaning
The cooker hood should be cleaned regularly (at least with the same
frequency with which you carry out maintenance of the fat filters) inter-
nally and externally. Clean using the cloth dampened with neutral liquid
detergent. Do not use abrasive products. DO NOT USE ALCOHOL!
WARNING: Failure to carry out the basic cleaning recommendations
of the cooker hood and replacement of the filters may cause fire risks.
Therefore, we recommend observing these instructions.
The manufacturer declines all responsibility for any damage to the mo-
tor or any fire damage linked to inappropriate maintenance or failure to
observe the above safety recommendations.
Grease filter
Traps cooking grease particles.
The grease filter must be cleaned once a month using non aggressive
detergents, either by hand or in the dishwasher, which must be set to a
low temperature and a short cycle. When washed in a dishwasher, the
grease filter may discolour slightly, but this does not affect its filtering
capacity.
To remove the grease filter, pull the spring release handle.