Greentek Alaska Island inox, Руководство пользователя

Страница: 5 / 28

5
EN
This appliance is marked according to the European directive 2002/96/
EC on Waste Electrical and Electronic Equipment (WEEE). By ensur-
ing this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this
product.
The symbol on the product, or on the documents accompa-
nying the product, indicates that this appliance may not be
treated as household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical and
electronic equipment. Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
For further detailed information regarding the process, collection and
recycling of this product, please contact the appropriate department of
your local authorities or the local department for household waste or
the shop where you purchased this product.
Appliance designed, tested and manufactured according to:
▶ Safety: EN/IEC 60335-1; EN/IEC 60335-2-31, EN/IEC 62233.
▶ Performance: EN/IEC 61591; ISO 5167-1; ISO 5167-3; ISO 5168;
EN/IEC 60704-1; EN/IEC 60704-2-13; ISO 3741; EN 50564;
IEC 62301.
▶ EMC: EN 55014-1; CISPR 14-1; EN 55014-2; CISPR 14-2;
EN/IEC 61000-3-2; EN/IEC 61000-3-3.
Suggestions for a correct use in order to reduce the environmental im-
pact: Switch ON the hood at minimum speed when you start cooking
and kept it running for few minutes after cooking is finished. Increase
the speed only in case of large amount of smoke and vapour and use
boost speed(s) only in extreme situations. Replace the charcoal filter(s)
when necessary to maintain a good odour reduction efficiency. Clean
the grease filter(s) when necessary to maintain a good grease filter ef-
ficiency. Use the maximum diameter of the ducting system indicated in
this manual to optimize efficiency and minimize noise.
Additional Installation Specifications:
Use only the fixing screws supplied with the product for installation or,
if not supplied, purchase the correct screws type.
Use the correct length for the screws which are identified in the Instal-
lation Guide.
In case of doubt, consult an authorised service assistance centre or
similar qualified person.
WARNING! Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.