12
Intelligent Radar Level
Transmitter
Programming Menu
-
RD2690, RD6850 series
Greentech, Korea
www.greentechkor.com E-mail: [email protected]
MINIMUM CURRENT 4.2
3.9mA
4mA
Press button SELECTION for the selected setting, press button OK for
confirmation.
4.3. Reset the
function of reset is
used for the reset
of finished
parameters.
There are four reset functions: basic setting, factory setting, peak
measurement and accumulated flow. Basic setting is to recover different
kinds of parameters in basic setting items back to factory default setting.
Factory setting is to recover all parameters back to factory fault setting.
Measurement peak setting is to clear the peak measurement in the
diagnosis. Reset for accumulated flow is to clear the accumulated flow
when the instrument is used for measuring the flow of open channel.
When LCD indicates current output (menu number 4.2), press button
SELECTION to enter reset function, LCD indicates as follows:
RESET 4.3
SELECTING RESET
Press button OK to enter the reset selection menu, select the
corresponding reset function item for resetting according to the needs.
4.4. Measuring
unit:
There are two choices of measuring units for users, one is the metric
system, the other is imperial system. When LCD indicates menu number
4.3, press button SELECTION to enter measuring unit setting menu, LCD
indicates as follows:
MEASURING UNIT 4.4
M (d)
Press button OK to enter the measuring unit selection menu, select the
unit according to the needs.
4.5. Language:
There are four choices of languages for users, they are Chinese, English,
French and Italian.
When LCD indicates measuring unit menu number 4.4, press button
SELECTION to enter language setting, and LCD indicates as follows:
LANGUAGE 4.5
ENGLISH
Press button OK for entering the languages selection menu and select the
language you need.
4.6. HART mode:
When two or more than two instruments are connected to a computer with
HART communication interface, use this function to set the instrument into
multiple working mode. When LCD indicates language menu number 4.5,
press button SELECTION to enter working mode menu. LCD indicates as
follows:
HART WORKING MODE 4.6
STANDARD
ADDRESS
0
Press button OK to enter HART working mode setting interface, LCD
indicates as follows:
HART WORKING MODE 4.6
STANDARD MULTIPLE
Press button SELECTION to select standard or multiple working modes.
