7
INSTALLATION REQUIREMENTS
Electrical Requirements:
•
pureWash requires 120 Volt 60 Hz power on a 15 amp fuse or circuit breaker .
Water Requirements:
•
Water pressure of 40 to 75 psi is required for pureWash to operate correctly and safely .
•
Water quality may affect the performance of your pureWash . If you have water
quality concerns, such as high iron content, consult a water filtration expert.
•
Some later model high-efficiency washing machines require water from both the
cold and hot water supplies even if a cold water cycle is selected . In this case the
To Washer and Household Use outlets can be connected to supply the hot and cold
water inlets on the washer, or a Y-valve can be used to connect both the cold and
hot water hoses from one of the pureWash outlet hose to the washing machine .
PRIOR TO INSTALLATION:
1 .
Remove your pureWash from its packaging and inspect for any shipping damage .
2 .
Turn off the hot and cold water supplies/faucets to your washing machine .
3 .
Remove the cold water hose from the cold water faucet .
4 .
Set Flow Rate Dial for type of washer . (i .e . Top Load, Front Load) by turning the dial on
the rear of the unit to the correct setting .
5 .
Remove the Desiccant Dryer Cartidge and peel away the Moisture Blocking Tab .
Replace the Cartridge when finished.
Содержание purewash pro
Страница 1: ...Owner s Manual ...
