GreenTech purewash pro, Руководство пользователя

Страница: 12 / 16

12
TROUBLESHOOTING CONTINUED
6. Clothes are being bleached.
Incorrect Flow Rate Setting.
Ensure you have the correct setting chosen based upon your type of washer . If your
problem continues go to pureWash .com/Support for a replacement .
7. Suds in the basin after first uses.
Detergent or residue is being cleaned out.
Run multiple washes without clothing until the problem is resolved . If problem
persists contact your dealer or go to pureWash .com/Suport .
8. Discoloration occurs in the viewing tube.
High Tannin levels in your water source.
The use of a pre-filter is required. Contact local water specialist to find proper filter to
remove Tannins .
9. Clothes have a rusty colored stain to them.
High Iron levels in your water source.
Do not dry or bleach the clothes as it will worsen the effects . Re-wash them in a
clean water source before drying. The use of our pre-filter (page 16) or an Iron specific
pre-filter is required.