GreenTech Pure Water ALKALINE Ti, Руководство пользователя

Страница: 7 / 16

7
Push the connector into the diverter.
Cut the supplied hose in half. Connect and
secure them over the inlet and outlet with
the hose fasteners.
Place clamps over the hose ends leaving open space to fit
over the water supplies. Connect Hose A to Tap Water In (A)
and Hose B to Drain Water Out (B) on the base of your unit.
Twist into position in a counter-clockwise direction.
Tap Water In (A)
Power Cord
Drain Water Out (B)
Hose fasteners
Hose A
Hose B
Outlet (A)
Inlet (B)
1
1
Screw the Outlet Hose into position at the top of the unit. Slide and secure the hoses over the Tap Water In
and Drain Water Out with the clamps.
3 4
2
2
INSTALLATION CONT.
2. Install the Connector.
Once installation is complete, plug your unit in and refer to OPERATIONS (Page 10) of this
manual to learn how to run your newly installed Alkaline XT.
3. Install Hoses.
4. Power