SCO
R
P
ION
6
&
8
S/
P
LUS (
5
3
0
, 6
3
0
, 7
3
0
& 8
3
0
)
112
6.2
DAILY- AND ROUTINE INSPECTIONS
(e)
Always remember to check the entire machinery, both the vehicle, the boom
mower, and the attachment tool in use.
It is important that the operator knows the machines and carries out the
inspections necessary for the vehicle, the boom mower, and the attachment
tool in use.
For correct service and maintenance, the instruction manuals for the
respective machines must be used at all times. (Vehicle, boom mower and
attachment tool)
Always be safe in the daily routines and inspection of machines!
Before starting up a new machine, a daily inspection is carried out before
starting up, and again already after 3-5 operating hours.
After this, a daily inspection after using the machine is sufficient, combined
with a 6-monthly inspection of the machine!
At the beginning of the machine's service life, extra attention should be paid to
the tightening of bolts, shielding and any belt tension on attachment tools.
Table 32
–
Checklist for daily inspections
DAILY INSPECTION:
Daily inspection is always carried
out after the first 3-5 operating
hours.
All points MUST be reviewed!
Daily inspection is then carried
out daily / after each time the
machine is used.
General overall impression of the machine:
(Any damages and/or errors must be corrected immediately)
Intact guards, incl. rubber flaps on attachment tools + belt housing
and its shielding must be intact.
Cracks in the frame's sides, corners and around the mount:
(Incl. bumps and/or bent parts.)
Loose parts or missing bolts:
Retighten all bolts! (
–
page 122)
In the case of belt traction on attachment tool(s):
Check belt tension and tighten the belt, if necessary, on the
attachment tool. (Follow the attachment tool's instruction material!)
Inspect the hydraulic system for leaks from fittings, hoses and possibly
motors.
Check hydraulic hoses and hose sleeves for correct routing:
Wear marks and/or displaced hose sleeves.
(
page 123-124)
Lubrication of the entire machine:
Best done after finished work, as bearings on the attachment tool are
warm and possible water/moisture is thereby pressed out of the
bearing. (
–
page 124-125)
Содержание SCORPION 530 PLUS
Страница 1: ...SCORPION 6 8 S PLUS 530 630 730 830 REDSKABSRAMME 2302 2802 3302 1 EDITION ...
Страница 2: ......
Страница 144: ...SCORPION 6 8 S PLUS 530 630 730 830 134 ...