SCORP
ION 6
&
8
S/P
LUS (
53
0,
6
30
, 73
0
& 8
30
)
81
End plate removed from control panel
Cutout for steel set screws on the back of the control panel
Control panel ready for installation
Mounting brackets (parts 1 & 2) can be bent and angled, so that it is possible
to position the control panel and joystick as best as possible in the cabin.
Adjustment work must be expected under installation and assembly of the
control panel and joystick in the vehicle cabin, depending on the individual
vehicle.
However, the general principles for installation and assembly should always
be followed!
3.
For mounting of the control panel,
remove the end plate at the top of
the control panel using the 4 small
screws:
4.
On the back of the control panel,
insert 2x steel set screw M4x20 into
the cutout:
(Then screw the end plate firmly onto
the control panel again)
5.
The control panel is now ready for
mounting in the vehicle cabin using:
•
2x Wing nuts M4, or
•
2x locking nuts M4
+ 2x washers Ø4.3
(The control panel should be placed
in the cabin where it is most
convenient for the operator!)
Содержание SCORPION 530 PLUS
Страница 1: ...SCORPION 6 8 S PLUS 530 630 730 830 REDSKABSRAMME 2302 2802 3302 1 EDITION ...
Страница 2: ......
Страница 144: ...SCORPION 6 8 S PLUS 530 630 730 830 134 ...