Hedge Cutter RC 162 13
SAFETY
The safety advice given in this manual, the present national emergency preventing
precepts and the existing in-house work-, operation- and safety precepts must be
complied with.
Additionally the safety precepts of the vehicle manufacturer must be complied with. If
the machine is used on public roads, the existing laws apply.
Safety advice for maintenance and inspection:
•
The head of operations must see to it that all maintenance, inspections and
fittings are carried out by authorized personel who has read and understood the
contents of this manual.
•
Maintenance must only be carried out when the machine is at a standstill. This
procedure as described in GreenTec´s manual must be carefully observed.
•
When maintaining a tool and/or a machine that is lifted, always secure with
suitable support units.
•
When replacing knives and the like always check the hydraulic system for
remaining pressure; always
reduce the pressure to zero.
•
Only use suitable tools and always wear work gloves, safety shoes and
goggles.
•
Dispose of oil and grease according to regulation.
•
Immidiately after finishing work, all safety and protection units must be installed
and activated again.
•
Before any use, the sections
in ”Putting into operation” by the manufacturer of
the tractor/vehicle must be carefully followed.
Safety advice for the head of operations/user:
•
It is of the utmost importance to be familiar with the equipment and the
operational units before starting work. Afterwards it is too late.
•
Work wear must be tight fitted. Avoid loose fitted clothes. Check surroundings
before work (children or obstacles such as rocks, fence posts, wire etc.) Always
make sure the is sufficient view. Safety distance for a tool in work is stated in
the manual.
•
Riding the tool or machine when transported or in work is not permitted.
•
Never leave the driver’s seat when driving.
•
Staying in the work area is forbidden. Safety distance for a tool in work is stated
in the manual.
•
Take extra precautions when working underneath power lines. Always keep a
safe distance to power lines.
•
Before leaving the vehicle, always lower machine/tool to the ground, remove the
ignition key and secure the vehicle from inadvertent activation and rolling!
Содержание RC 162
