GreenPower IET FORMULA GOBLIN G2, Руководство пользователя

Страница: 23 / 27

BATTERY CHARGING
23
Your Goblin G2 kit is not supplied as standard with a battery charger. If you need to purchase one please visit our
online shop at Greenpower.co.uk where you will find a range of suitable chargers available.
Do NOT connect charger to mains supply before proceeding.
Batteries can be charged either singly using a 12 volt charger or as a pair using a 24 volt charger.
Failure to correctly connect your battery charger may damage batteries and can be dangerous. Please CHECK your
battery charger output voltage before proceeding and select step 1 or 2 below accordingly.
1. 12 Volt Charger for a single battery
Disconnect cables from the battery.
Attach red (positive) lead from charger to red (positive) battery terminal.
Attach black (negative) lead from charger to black (negative) battery terminal.
2. 24 Volt Charger for two batteries
Disconnect cables G2B and G2C from batteries.
Using cable G2A connect black (negative) of one battery to red (positive) of the other battery. Connect red
(positive) lead from charger to unconnected battery red (positive) and black (negative) lead from charger to
unconnected battery black (negative) terminals.
3. Switch On
With the above connections made connect charger to mains supply and switch on. Indicator lights on the
charger will show status and completion of charging.
If you have any queries please contact Greenpower: info@greenpower.co.uk