Greenlee Ultra Tugger Скачать руководство пользователя страница 7

Страница: 7 / 56

Ultra Tugger

Cable Puller and Pulling Packages

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

IMPORTANT SAFETY INFORMATION

Inspect puller and accessories before use. Replace

any worn or damaged components with Greenlee

replacement parts. A damaged or improperly assem-

bled item can break and strike nearby personnel with

sufficient force to cause severe injury or death.

Entanglement hazard:

Do not operate the cable puller while wearing

loose-fitting clothing.
Retain long hair.

Failure to observe this warning could result in severe

injury or death.

•

Wear eye protection when using this

tool. Failure to wear eye protection

could result in severe eye injury from

flying debris.

When using the wheeled carriage to transport the

Ultra Tugger:

Keep personnel out of the path of transport.
Evaluate the terrain of over which the carriage is to

move. If in doubt, obtain additional help and move

the carriage slowly.
Do not transport over inclines of more than 15°.
Do not transport the carriage with boom tubes

longer than the supplied 3' and 4' tubes.

•
•

Содержание Ultra Tugger

























































Результаты поиска

Содержание Ultra Tugger

Отзывы:

Похожие инструкции для Ultra Tugger

Бренды по названию

Популярные бренды

Greenlee Ultra Tugger, Инструкция по эксплуатации

Результаты поиска

Содержание Ultra Tugger

Отзывы:

Похожие инструкции для Ultra Tugger

Бренды по названию

Популярные бренды