Greenlee Textron / Subsidiary of Textron Inc.
7
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
EK06FT Battery-Powered Crimping Tool
Operation
Electric shock hazard:
The EK06FT is not insulated. When
using this unit near energized
electrical lines use proper personal
protective equipment.
Failure to observe this warning can
result in severe injury or death.
Wear eye protection when operating
this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris or hydraulic oil.
Charging the Battery
Read the instructions supplied with the battery charger.
Battery Condition
Preparation
An incomplete crimp can cause a fire.
• Use proper connector and cable combinations.
Improper combinations can result in an incomplete
crimp.
• The relief valve will sound to indicate a completed
crimp. If you do not hear the sound of the relief
valve, the crimp is not complete.
Failure to observe this warning can result in severe
injury or death.
Battery Load Display
Battery Condition
Momentary illumination
Normal
at beginning of crimp
Flickering at end of crimp
Normal
Flickering during entire crimp
Low charge
Constant illumination
Low charge
during entire crimp
Inspect tool before use. Replace any worn or
damaged parts. A damaged or improperly assembled
tool can break and strike nearby personnel.
Failure to observe this warning can result in severe
injury or death.
• Keep hands away from the
crimping tool head when crimping.
• Lock trigger when not in use.
Failure to observe these warnings
can result in severe injury or death.
