Greenlee CM-1300, Инструкция по эксплуатации

Страница: 9 / 52

CM-1300 • CM-1350
9
1. Set the selector according to the Settings Table.
2. Refer to “Typical Measurements” for specific measurement instructions.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the
battery (or batteries).
• If the unit still does not function as expected, send the unit to Greenlee for repair. Refer to
the instructions under the Warranty.
4. Take the reading from the circuit or component to be tested.
Settings Table
Electric shock hazard:
Contact with live circuits can result in severe injury or death.
Operation
To measure set the selector connect the and connect the
this value … to this symbol … red lead to … black lead to …
Continuity* V-
Ω
COM
Resistance V-
Ω
COM
DC Voltage V-
Ω
COM
AC Voltage V-
Ω
COM
AC Current (1000 A max.) Remove lead Remove lead
Frequency Hz Remove lead Remove lead
* Tone sounds if the measured resistance is less than approximately 30
Ω
.