background image

Greenlee Textron / Subsidiary of Textron Inc.

3

4455 Boeing Dr., Rockford, IL 61109-2988    815/397-7070

1721-M4 Basic & 1722-M4 Basic Hydraulic Power Pumps

Electric Shock Hazard:

• Do not expose power tools to

rain.

• Do not immerse the pendant

switch in water or other liquid.

• Do not connect the pump to any system or

system component other than those supplied by
Greenlee and rated at less than 10,000 psi
(68,950 kPa).

• Do not alter the internal high-pressure relief valve

setting.

• Do not use this pump in a hazardous environ-

ment. Hazards include open flame and flammable
liquids or gases.

Failure to observe these warnings could result in
severe injury or death.

IMPORTANT SAFETY INSTRUCTIONS

Skin Injection Hazard:

High pressure oil easily punctures
skin, causing serious injury,
gangrene or death. If injured, seek
medical help immediately to remove
oil.

Do not use fingers or hands to
check for leaks.

Depressurize hydraulic system
before disconnecting the hose.

• Inspect pump, hoses, couplers and fittings for

wear or damage. Replace worn, damaged or
missing components with Greenlee replacement
parts.

• Do not twist, kink, curl, paint or cut the hydraulic

hoses.

• Wear eye protection when operating this

equipment.

• Disconnect the pump from the power supply,

rotate the release valve lever to AUTO RELEASE
position, and disconnect the hose from the ram
and the pump before performing any service.

Failure to observe these warnings could result in
severe injury or death.

• The pump is heavy, weighting up to 75 lbs.

Follow NIOSH work practices for manual lifting.
If in doubt, get help.

• Unplug pump when not in use and when

changing accessories.

• Do not use the hose to pull, lift, or carry the

equipment.

• Always work in an area providing good footing

and support.

• Keep work area well-lit, free of clutter, and dry.

Failure to observe these warnings could result in
injury or property damage.

SAFE THESE INSTRUCTIONS

Additional copies of this manual are available upon request at no charge.

Содержание 1722-M4











Отзывы: