11
GREENIS
POWER BLENDER
GREENIS
POWER BLENDER 12
WARNING!
Tamper Tool – IMPORTANT!
USER PRECAUTIONS
USER PRECAUTIONS
Rotating Blades Can Cause Severe Injury.
DO NOT put hands, spatulas, utensils, etc. into the jar while the blender is running or while the jar
is on the base.
Different tampers and lids match with different jar styles, types and sizes. Only use the tamper
that is supplied with your jar and blender.
Make sure the lid is securely installed on the jar when using the tamper. Stop the blender before
placing the tamper through the hole in the lid to avoid contents escaping or Injuries.
DO NOT use other implements to replace the tamper if it is missing. Please contact your local
dealer to purchase replacement part.
During operation, DO NOT put your hand, or any other tool (like a spoon or other hard object)
into the blender jar, as this could cause injuries and damage the blender. The blender is suitable
for food ingredients only!
About measuring cup, lid and seal ring
：
Place the measuring cup onto the lid (place measuring cup through the central opening of lid and
twist clockwise to fasten) and place the lid onto the jar securely.
Make sure that the machine is not running before putting the tamper.
The seal ring around the lid is detachable. When cleaning remove seal ring from the lid to
thoroughly clean away residues stuck inside the seal ring and the lid.
Other important precautions
Please pull out rotary dial (speed control), tear off screen-protector and then assemble rotary
dial (speed control) properly before using.
Blending dry ingredients for a long time may cause overheating and trigger the thermal protec-
tion mechanism built in the motor. To avoid this, start with low speed and then adjust to higher
speed if the ingredients are very thick or dry. If it’s still a problem, then reduce the amount of
ingredients or add some liquid to decrease viscosity.
The motor will stop working when overloaded to protect the motor, it will work again once
cooled. Should the motor overheat unplug the blender and cool down the motor for 45 minutes
in a cool place or in front of a fan.
While the blender is running, ensure the lid and measuring cup are fastened tightly to avoid
splashing.
DO NOT put hands, spatulas, utensils, etc. into the jar while the blender is running or while the jar
is on the base to reduce the risk of severe injury to persons or damage to the blender.
When making hot drinks, ensure the lid and measuring cup are fastened tightly and start the
speed from low and then to higher speed.
When making sauces (like hummus, jam, peanut butter, sesame paste, etc.), nut butters, or
flours, the volume of ingredients should be between 3 and 5 cups; DO NOT operate continu-
ously for a long period of time, or your ingredients may develop a scorched flavor because of
overheating. Too many ingredients may cause overload and trigger the motor’s thermal
protection.
Place liquid and soft ingredients in the blender before hard ones like ice cubes.
DO NOT remove the jar until the blades come to a complete stop. Removing it sooner may
cause damage to the drive socket.
Stop the machine if there is a scorching smell. It may be caused by overload of ingredients or if
the blades and drive socket are not fully engaged.
It is recommended to operate the machine no more than 10 minutes at a time.
