background image

53148 • RSF/RSFP, Rev. 4, January 2019 

Copyright 2019 © Greenheck Fan Corporation

8

Greenheck’s Centrifugal Roof Supply Fans catalog provides 
additional information describing the equipment, fan 
performance, available accessories, and specification data.

®

Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com

Our Commitment

AMCA Publication 410-96, Safety Practices for Users and 
Installers of Industrial and Commercial Fans, provides 
additional safety information. This publication can be obtained 
from AMCA International, Inc. at www.amca.org.

As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications 
without notice.

Product warranties can be found online at Greenheck.com, either on the specific product page or in the literature 
section of the website at Greenheck.com/Resources/Library/Literature.

*Galvanized motor plate shown. 
Painted steel motor bracket used on 
units with smaller motor frame sizes.

Belt

Filters

Shaft Pulley

Blower Mounting Angle

Vibration Isolators (4)

Motor Pulley

Motor 

*Motor Plate 

Blower Unit

Parts List

CAUTION

La présence d’un moteur antidéflagrant sur un 
ventilateur ne garantit pas que tout l’appareil est 
antidéflagrant. Pour connaître les emplois autorisés 
de l’appareil, voir son marquage de conformité UL.

CAUTION

A fan manufactured with an explosion resistant motor 
does not certify the entire unit to be explosion proof. 
Refer to UL Listing Mark for the fans approved usage.

Each fan bears a manufacturer’s nameplate with model number and serial number embossed. This information 
will assist the local representative and the factory in providing service and replacement parts. Before taking any 
corrective action, make certain unit is not capable of operation during repairs.

Содержание RSF









Отзывы: