BRIDGE BRACKET
PART NO. 711779
DRAWING NO. 89814
1 REQ'D PER ASSEMBLY
3/4" FLAT WASHER
1 REQ'D PER
ASSEMBLY
BASE ASSEMBLY
3.00 in.
3/8-16 SPINLOCK NUT
2 REQ'D PER ASSEMBLY
HANGING BRACKET
PART NO. 710774
DRAWING NO. 85537
3/8-16x3/4 SPINLOCK BOLT
2 REQ'D PER ASSEMBLY
Lifting Instructions
Greenheck's Modular Small Cabinet Fan (MSCF) should be lifted by the factory supplied lifting
lugs or frame rails and a spreader bar to prevent damage from occurring to the equipment (see
figure 1). Avoid twisting or uneven lifting of equipment. Do not lift equipment by coil connections
or headers. The unit must remain upright during lifting. All access doors and panels must be
closed during lifting to avoid damage (see figure 1).
Figure 1
3
Frame Rails
(By others)
Spreader bar
Lifting lugs
The MSCF should be hung by the factory supplied lifting lugs or field supplied frame rails as
shown respectively in figures 2 and 3. The number of hanging brackets used will be determined
by the number of fan modules.
Figure 3
Figure 2
Hanging Instructions
External Mounting Isolation
The MSCF is available with
both external neoprene and
spring isolation options. When
external isolation is selected a
bridge bracket will be
provided to reduce installation
time (see figure 4).
3/4" FLAT WASHER
1 PER ASSEMBLY AS NEEDED
3/8-16 SPINLOCK NUT
2 REQ'D PER ASSEMBLY
3/8-16x3/4 SPINLOCK BOLT
2 REQ'D PER ASSEMBLY
HANGING BRACKET
PART NO. 710774
DRAWING NO. 85537
BRIDGE BRACKET
PART NO. 711779
DRAWING NO. 89814
1 REQ'D PER ASSEMBLY
KET
779
89814
ASSEMBLY
ER
7
LOCK BOLT
SSEMBLY
HANGING ASSEMBLY
Figure 4
