Step 3
Step 4
2
Fabra Hood • Form B
Figure 3 Fabra hood B #471321
Attach the HOOD SUPPORT ANGLE to the BASE
ASSEMBLY, using four (4)
1
⁄
4
-20 fasteners per angle.
(See Figure 3, DETAIL "B") On some units two (2)
DIAGONAL BRACES come pre-attached to the
HOOD SUPPORT ANGLE. Fasten the loose end of
the DIAGONAL BRACES to the BASE ASSEMBLY,
using one (1)
1
⁄
4
-20 FASTENER PER diagonal brace.
(See Figure 3, DETAIL "C")
Figure 3
Tighten all fasteners. Caulk all inside corners where the
base sections came together. At this point, the base
may be lifted onto the roof curb before proceeding with
further assembly.
Step 5
Figure 4 Fabra hood B #471321
Attach the SIDE BIRDSCREEN ASSEMBLY to the HOOD
SUPPORT ANGLE and BASE ASSEMBLY, using four (4)
1
⁄
4
-20 X 1" fasteners per screen assembly. (See Figure 4)
Figure 4
