Connection and Operation of Thermostat (RRL2)
RRL2 -
Dampers will be supplied with a thermostat-type temperature response device, as a standard. The device is
B33- SFTFUUBCMFMJOLEFWJDFXIJDIPOMZJODPSQPSBUFTPOFUIFSNPTUBUBOEUIFSFGPSFUIFEBNQFSSFNBJOTDMPTFEBT
TPPOBTJUTTFOTPSUFNQFSBUVSFJTSFBDIFE5IF33-EPFTOPUDPOUBJOCMBEFJOEJDBUJPOTXJUDIFT3FGFSUP'JHGPS
XJSJOHPGUIF33-UIFSNPTUBU
Figure 9
RATINGS
Integral Switch Type:
Single Pole, double throw
Electrical Capacity:
10 Amps, 1/3 hp, 120 or 240 Vac
1/2 Amp, 125 Vdc;
1/4 Amp 250 Vdc
5 Amps, 120 Vac “L” ( lamp
load)
1.0 Amps, 24 Vac
1.5 Amps, 24 Vdc
Temperature Limit
: 165° F ( standard primary sensor )
212° F ( optional primary sensor)
t$3%3FW4FQUFNCFS
$PQZSJHIUª(SFFOIFDL'BO$PSQPSBUJPO
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the
Library under Warranties.
®
1IPOF t'BY t&NBJMHGDJOGP!HSFFOIFDLDPNt8FCTJUFXXXHSFFOIFDLDPN
Our Commitment