GreenFlux T2235-02, Руководство по установке

Страница: 12 / 35

GreenFlux Dual Socket Smart Charging Controller page - 12 - ©GreenFlux Assets B.V. – All rights reserved.
Installation Manual; version 4.6; 2019-11-05 Doc.nr. GFX.2017.14201807
5 MISO
6 MOSI
7 SCK
8 SDA (SS0/chip select)
2.7 SOCKET CONTROL
For this connection, a standard push-in spring Phoenix connector is needed.
Type FMC 1,5/12-ST-3,5
(PHOENIX CONTACT 2776497)
Figure 11 Standard push-in spring Phoenix plug
Figure 12 Socket Control connections
•
socket 1 : Pin 13 up to 24 must be used.
•
socket 2 : Pin 1 up to 12 must be used.
2.7.1 SOCKET 1
Pin 13 up to 24 must be used for controlling socket 1:
PIN CONNECTION INFO
13 PP (proximity pilot / plug presence)
Charge cable type detection
14 CP (control pilot) Communication with (PH)EV
15 Temperature Temperature sensor connection
16 Ground
Use with temperature sensor or
attached cable model
17 LED red Status of socket for user
18 LED green Status of socket for user
19 LED blue Status of socket for user