62
WORKING TECHNIQUES
•
Relaxation cut:
To prevent tree bark detachment, recoil tension, or sword pressure when cutting thick branches,
first make a strain cut at the bottom of the branch. To make this cut, place the attachment by pushing it towards
the bottom of the branch until it reaches the tip of the sword. Make the cross cut.
•
Flush cut of thick branches:
If the diameter of the branch is greater than 10 cm, cut first at the bottom and
make a cross-section at a distance of about 25 cm from the final cut. Then make the cut flush, starting with a
strain cut and ending with the cross cut.
MAINTENANCE
Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION:
Make sure the engine is completely shut down before performing any
maintenance or repair. This will eliminate any potential risk.
PERIODIC MAINTENANCE
MAINTENANCE
EACH
USE
EACH
MONTH OR
15H USE
EACH
3 MONTHS OR
30H USE
EACH
6 MONTHS OR
60H USE
EACH
12 MONTHS OR
100H USE
Check for loose bolts/
nuts
Check
Tighten all bolts and
nuts
Realize
Replace
Fuel filter cup (if
equipped with it)
Check
Air filter
Check
Clean/Replace if necessary
Fuel filter (if
equipped)
Check
Replace
Spark plug
Check
Replace
Cleaning/Purging the
fuel tank
Realize
Replace
Fuel line
Check
Clean/Replace if necessary
Blades/Chain (parts
with blades)/Chain
only
Check
Clean/Replace if necessary
Adjusting the idle
speed
Adjust
Motor adjustment
Check
Содержание PP650X
Страница 2: ......
Страница 83: ......
Страница 84: ...www greencut es Manual revisado en abril de 2019 ...