![Greencut GWP300X Скачать руководство пользователя страница 53](http://html1.mh-extra.com/html/greencut/gwp300x/gwp300x_instruction-manual_2261579053.webp)
53
EN
MAINTENANCE
Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION:
Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.
ATTENTION:
If the water pump is used to pump water from the sea, please pump fresh water right
after pumping the seawater to reduce signs of corrosion and to remove sediment from seawater.
MAINTENANCE
EVERY USE
EVERY MONTH
OR 20H USE
EVERY 3
MONTHS OR
50H USE
EVERY 6
MONTHS OR
100H USE
MAINTENANCE
EVERY 12
MONTHS OR
300H USE
Oil level Check
Check
Oil change
Check
Change oil
Air filter
Check
Replace
Spark plug
Clean or
replace
Clean or
replace
Fuel supply pipe
Replace
Turbine
Check
Water pump reservoir
cap
Check
Water inlet valve
Check
OIL CHANGE
Drain the oil when the engine is still hot to ensure rapid and complete drainage.
1. Remove the plug / dipstick from the oil tank and the drain plug to drain the oil.
2. Re-install the drain plug and tighten it firmly.
3. Refill with the recommended oil up to the indicated level..
Please dispose of used motor oil respecting the environment. We suggest you take it in a sealed container to your local
recycling centre or to a service station for recovery. Do not throw it in the bin or pour it on the ground.