71
EN
TROUBLESHOOTING
The table includes some of the most common problems, their causes and remedies.
PROBLEM
SOLUTION
Engine will not start
• Add fuel to the tank
• Connecting the spark plug wire
• The throttle must be in the throttle position for a cold start.
The engine runs
irregularly during
operation
• Clean or replace the air filter
It's hard for the
engine to start
• Drain the old fuel and replace it with a new one.
• Make sure that the spark plug wire is connected correctly.
• The safety control levers must be in a neutral position to start the engine.
The engine lacks
power
• Raise the cutters to work at a shallower depth (using a depth adjuster)
• Remove and clean the fuel tank
• Clean or replace the air filter
• Carburettor setting is incorrect, have the engine serviced.
• Replace the spark plug and adjust the distance
• Drain and refill the tank and carburetor
The engine does
not stop when the
control is in the stop
position.
• Check and adjust the throttle
Handlebar moves
forward during
ignition
• The safety control levers must be in neutral position to start the engine.
It's difficult
to control the
handlebars when
you're ploughing
• Set the wheels to the working position
• Raise the burs for shallower ploughing
The burs turn but
the wheels don't
turn.
• Put the wheels in working position
• If internal transmission fails, contact your dealer
The teeth spin, the
wheels spin, but the
tiller doesn't move.
• Lower the tines to deepen by raising the depth setting lever
Belts are in neutral
or reverse position
• Turn off the engine and let it cool down
• Disconnect the spark plug wire
• Pull down the safety control levers
• Replace the spark plug strap and cable
