67
EN
INSPECT AND CLEAN
Sword
Before every use
Complete saw
After each use
Chain brake
Every 5 hours*
ATTENTION
:
• Always use gloves when working around the blade assembly.
• Use only original spare parts for this machine.
• Clean the device with a slightly damp cloth.
REPLACEMENT OF SWORD AND SAW CHAIN
ATTENTION
: Saw chain is very sharp, always use protective gloves when doing any kind of
maintenance to the chain. A dull or worn out chain can cause excessive engine speed during
cutting, which can cause severe damage to the engine. Incorrect chain sharpening increases the
potential for kickback. Failure to replace or repair a damaged chain can cause serious injury.
1. To replace the parts, follow the same assembly instructions as for the bar and chain of the chainsaw.
INSPECTION AND CLEANING OF THE CHAIN BRAKE
•
Always keep the chain brake mechanism clean by lightly brushing the connections so that there is no dirt.
•
Always check the operation of the chain brake after cleaning.
TROUBLESHOOTING
The table includes some of the most common problems, their causes and remedies.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The device does
not work.
The battery is not installed correctly.
Put the battery in place.
The ON/OFF switch is not on.
Make sure the machine is turned on.
The chain brake is not set backwards.
1. Pull the chain brake back (towards the
user).
2. Release the ON/OFF switch and the safety
lock.
3. Restart the device by pressing the ON/
OFF switch and the safety lock.
The battery is exhausted.
Charge the battery.
The battery is defective.
Contact the after-sales service.
The device is defective.
NOTE:
If you are unable to resolve the problem, please contact the Official Technical Service..
Содержание GS200L
Страница 2: ......
Страница 87: ......
Страница 88: ...www greencut es Manual revisado en diciembre de 2020...