Greencut CBT400L, Инструкция по эксплуатации

Страница: 31 / 44

31
EN
TECHNICAL DATA
CHARGER
Model CBT400L
Input 100-240V / 50-60Hz AC
Output 40V 1,8A
Compatible Battery Pack BT402L (BAT-40V-2A) - BT404L (BAT-40V-4A)
NOTE: GREENCUT reserves the right to modify the specifications of the device
without prior notice.
LED FUNCTIONS
MODE RED
GREEN
Stabdby power OFF ON
Charging OFF Flash
Full Charge OFF ON
Too hot too cold Flash Flash
Defective Flash OFF
PRODUCT USE
CHARGING THE BATTERY PACK
Battery packs are shipped in a low charge condition to prevent possible problems. Therefore, you
should charge them until the green LED on the front of the charger comes on.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the batteries in the battery pack will become hot. You should
let a hot battery pack cool down for approximately 30 minutes before attempting to recharge.
NOTE: Refer to CHARGING A COOL BATTERY PACK for normal recharging of
batteries.