10
S E T T I N G U P F O O T R E S T S
The chair that you have been supplied with will
have a footrest specification configured to meet
your assessed needs. Environment of use and
functional operation determine the final
specification required.
In addition to the configurable foot support
plates, shown above, Greencare DB1 has a
choice of detachable footrest brackets, and
footrest support options including an angle
adjustable type a rigid foot bar and a dynamic
foot support for use in tight spaces
The lift and swing type bracket features a
double locking action for increased security. The
frame location stud for this is also smaller when
footrests are removed for transfer. The swing
type bracket swivels into position and releases
with a single touch, these are easier for the
occupant.
To attach the footrest brackets, locate the upper
pivot spigot in the top of the front frame tube,
press down or swivel to located in the forward
facing position. To release depress the trigger
on the underside of the mounting support
feature.
Footrest brackets should be swivelled away or
removed for occupant transfer. It is possible to
pivot the footrest bracket inwards or outwards
depending on the user requirement. Footrest
brackets should normally be removed for
storage.
For complete footrest bracket removal,
continue to lift so that the upper pivot clears the
front tube location. When removed, place the
footrests carefully in a safe position ready for
the next use.
Position, height of footrest support plates on
the Greencare wheelchair are configurable. This
is set by means of three fixing screws on the
underside of each unit. Each DB1 footrest has a
choice of alignment positions. This will normally
be set to meet user need, with the central gap
between footrests minimized.
A jacking screw at the end of the footrest
bracket stem adjusts the sideways angle of the
footplate. When unloaded this will be slightly
upward facing. It is normal for this to deflect
under foot pressure, and it can be adjusted to
be horizontal by this screw.
The foot support plate height is adjustable by a
range of fixing screw positions, and a series of
threaded holes in the inner stem. Using this
combination of holes, the footrest can be
aligned and tightened in its location.
Footrest height settings are important. A
correctly set footrest height will help to spread
the load of the occupant weight, easing
pressure, and improving the comfort.
