www.GreenSeriesFitness.com
©June 2015
Call Toll free at (800) 269-7410
VOR-IC7000-G Revision 1.1
6
ASSEMBLY
VOR-IC7000-G
Step 1: Front Foot
Attach the front foot (#7) to the frame using the (2) bolts (#3A) and (2) washers (#6) as illustrated
in the diagram and then tighten the bolts.
Step 2: Rear Foot
Attach the rear foot (#2) to the frame using the (2) bolts (#3A) and (2) washers (#6) as illustrated
in the diagram and then tighten the bolts.
Step 3: Pedals
1. Attach the pedals (#70R/#70L) into the crank arms (#62R/#62L). Each pedal is marked with
the letter R (right) or L (left) to denote the side of the bike they are located.
NOTE:
the right hand crank is on the same side as the chain cover (#71).
2. Be careful to align the threads correctly to avoid any damage. Apply LocTite Threadlocker
Blue-242 on the thread and tighten using a 15mm wrench.
- Pedal marked R installed on right crank (clockwise),
- Pedal marked L installed on left crank (counterclockwise).
- Pedals must be fastened with significant force to avoid loosening while using the
indoor cycle. (25-30 lbs. ft. torque)