Green Valley LiPod, Руководство пользователя

Страница: 19 / 26

In general, the default status bar and settings bar are displayed on the home screen.
4.5.2 Wifi settings
click the Wifi button on the right of the interface to set the Wifi name and password when the device is not working.
Wifi Name
：
Set the Wifi name. The default name is LiPod Lite- Device number.
Password
：
Set the Wifi password
，
the default password is greenvalley
。
Note
：
The wifi password will be reset to default if you update the system.
To change the Wifi name, you must change the Wifi password at the same time. Otherwise, the password cannot be changed. The
new Wifi password must be in E digit format.
Wifi Settings
4.5.3 System Setting interface
Before data collection, click Setting button on the right side of the interface to set pre-processing parameters, including distance filter, Angle
filter, data collection mode, and add suffix name of output data.
distance_filter
：
Distance filter, only process point cloud data within the set distance
；
device_calibrate
：
Equipment calibration mode, this option is locked automatic mode, no need to adjust;
enoder_speed
：
Data acquisition mode is divided into fast and slow. The fast mode scans a FOV for about 3 minutes, and the slow mode
scans a FOV for about 6-7 minutes. In order to obtain higher quality data, *recommended to use the slow mode *.
encoder_angle
：
Angle filter, only process point cloud data within the set angle range (this function is temporarily unavailable)
；
suffix_name
：
Add a suffix to the acquired e57 file name for easy identification.
19