background image

Page 8 

✟✟✟✟✟✟✟✟

FEATURES

KNOW YOUR LAWN MOWER

See Figure 1.

The safe use of this product requires an understanding of 

the information on the 

product

 and in this operator’s manual 

as well as a knowledge of the project you are attempting. 
Before use of this product, familiarize yourself with all op-
erating features and safety rules.

BATTERY METER

The battery meter measures the amount of charge remain-
ing in the battery.

GRASS CATCHER

The  grass  catcher  prevents  grass  clippings  from  being 
strewn across your lawn as you mow.

HEIGHT ADJUSTMENT LEVER

The  height  adjustment  lever  provides  cutting  height  
adjustments. 

MOTOR/BLADE CONTROL ASSEMBLY

The motor/blade control, located on the upper handle of the 
mower, engages and disengages the motor and blade.

MULCHING PLUG

Your mower is equipped with a mulching plug that cuts and 
recuts the grass for finer clippings. 

SWITCH KEY

The switch key must be inserted before the mower can be 
started.

SIDE DISCHARGE DEFLECTOR

Use  the  side  discharge  deflector  on  your  mower  when 
the grass is to

o high to mulch or when side discharging is 

preferred.  The  grass  clippings  produced  when  using  the 
side  discharge  deflector  are  noticeably  larger  than  those 
produced when using the mulching plug.

UNPACKING

This product requires assembly.

  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

  If  any  parts  are  damaged  or  missing,  please  call 

1-800-377-5888 for assistance.

PACKING LIST

Mower

Switch key

Side Discharge 

Deflector

Mulching Plug
Grass Catcher
Charger

Operator’s Manual

ASSEMBLY

WARNING:

If any parts are damaged or missing do not operate this 
product until the parts are replaced. Failure to heed this 
warning so could result in serious personal injury.

WARNING: 

Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any 
such alteration or modification is misuse and could result 
in  a  hazardous  condition  leading  to  possible  serious 
personal injury.

WARNING:

Do  not  insert  switch  key  until  assembly  is  complete. 
Failure to comply could result in accidental starting and 
possible serious personal injury.

WARNING:

To prevent accidental starting, do not make any adjust-
ments or installations with the switch key inserted.

Содержание 60020 GT





















Отзывы: