__________________________________________________________________________________
Green-GO Slim Audio Interface 4 Wire
–
Quick Start Guide
Enabling AutoTalk
AutoTalk
Ch1-32 / Off
→
Enable AutoTalk on channel 1 through 32 or turn it off.
When AutoTalk is activated, available audio will be sent to the
selected channel if no other sends are active.
Modifying the program audio parameters
Program Audio
Mode
→
Normal / Local IFB
Src
→
Select the program audio source.
This will open up a list of sources that can be selected as the program
audio source (Program, Stage, Sound, Light, Video, etc.).
Vol
→
Set the volume of the program audio. The range of the volume can be
altered between 12dB and -36dB. To mute the program audio, scroll
past -36dB and the MUTE value will show up.
Dim
→
Dim the program audio during communication.
Dimming range is from 0dB to -12dB to -24dB and MUTE option.
Modifying the Audio In/Out settings
Audio In/Out
Output
→
Set the output level of the Audio Output.
Available range is MUTE, -42 to 6 dB.
LoopBack
→
Set the level of the LoopBack from 0 to -39 dB or turn it off.
AutoGain
→
Set the dynamic amplification to avoid distortion.
Available settings are Slow/Med/Fast/Off.
If AutoGain is turned off the Max Gain option is disabled.
MaxGain
→
Set the maximum gain of the input signal - range is from -12 to 28 dB.
Threshold
→
Set the threshold level required for the input signal to be transmitted
–
editable range is from -45 to -20dB or turned Off.
Hold
→
Fast/Med/Long/XLong
In
→
Line In / 125 Hz to 4 kHz
