Green-Go Dante Interface X, Быстрый старт

Страница: 5 / 11

__________________________________________________________________________________
Green-GO Dante Interface X – Quick Start Guide
Set up a Dante connection as User based port
Set up a Dante connection as User based Audio in and output. Audio can be sent from and
received by multiple channels simultaneously. Routing, cues and calls can be triggered via
GPIO.
Mode: User
Channels
à
Set up and alter individual channels for this Dante connection.
1-32
à
Select one of the 32 available channel to assign a user or group to.
ID
à
ID of the user or group assigned to the channel
Group
à
Assign a group to the channel
User
à
Assign a user to the channel
None
à
Remove assigned group/user from the channel
Set Label
à
Set a different label for the channel
Group
à
Select a group label
User
à
Select a user label
Clear
à
Clear the label set
Talk
à
For Future Use
Disable
à
talk is disabled for this channel
Momentary
à
talk is enabled as long as a corresponding trigger is
active
Latch
à
talk is toggled between enabled or disabled when a trigger
becomes active
L atch/Momentary
à
A combination of latch and momentary. A short
activation will toggle the Latch and a long activation will act
Momentary.
Listen
à
Toggle the Listen on this channel on or off.
Volume
à
Set the volume for this channel. The range -24 dB through 12 dB.
Priority
à
Set the priority level of the channel - see also Priority dim in the
Options menu
Call Send
à
For Future Use
Call Receive
à
For Future Use
Bandwidth
à
Set up the used bandwidth for this input
Normal
à
7kHz bandwidth is used for this input
Enhanced
à
14kHz bandwidth is used for this input
An
à
Assign group to be handled as Announce Channel
Em
à
Assign group to be handled as Emergency Channel