Green-Go Bridge X, Быстрый старт

Страница: 6 / 9

__________________________________________________________________________________
Green-GO Bridge X – Quick Start Guide
Connection
à
Set up this port as the Passive side of the connection.
Password
à
Set up a password for this connection. The
password needs to be identical on both sides of the
connection. and is always 8 characters long.
Generate Password
à
Automatically generate a random 8-character
password
Local Port
à
Set up a UDP port for the connection. This port
needs to be the same on both sides of the
connection. A different and free port needs to be
used for each connection
SndBuf
à
Set up the size of the audio packages being sent
out from this port. a connection with high jitter in
latency needs a larger Buffer
RecvBuf
à
Set up the size of the buffer for the incoming
audio packages A connection with high jitter in
latency needs a larger Buffer
Save
à
Save all changes made on this port connection
Cancel
à
Discard all changes made on this port connection
Configuration cloning
All devices in the local Green-GO network need to have the same configuration to be able to
communicate with each other.
Clone Config
à
Clone a configuration file from the network
Configuration File A
à
Load configuration file A
Configuration File B
à
Load configuration file B
etc.
Factory Default
à
Load the factory default configuration file
Setup internal Network
Here you can modify the Network settings of the Internal Green-GO network.
Dynamic
à
Select the connection mode.
ON
à
Use a dynamic IP. If a DHCP server is on the network this will supply an
IP address to the device. If there is no DHCP server the device will self-assign
a Link local IP.
OFF
à
Use a static IP
IP address
à
Set the IP address to be used
Netmask
à
Set the netmask to be used
Gateway
à
Set the gateway to be used
Save
à
Save the current network setup
Cancel
à
Discard current network changes