PARTS (Not to scale)
23x
Medium Clevis Pin
23x
R-Clip
1x
Roof
1x
Floor
1x
Front Wall
1x
Left Wall
1x
Right Wall
1x
Rear Wall
1x
Centre Wall
DIMENSIONS
Dimensions: 50(w) x 23(h) x 50(d) cm
TOOLS REQUIRED
Sharp knife (e.g. Stanley Knife) or Sand Paper
PRE-ASSEMBLY CHECKS
Prior to assembly, check that you have all the required parts. Please be aware that, being a recycled material, some minor
surface blemishes or defects may have occurred during manufacture. These will not affect the functionality of your product.
Trim any excess plastic using sand paper or a sharp knife. (NOTE: Be careful to cut away from yourself.)
If any parts are missing, please email [email protected]
Please state the part number, quantity missing, your phone number and your full postal address.
SPARE PARTS
Spare parts are available to order online via our website:
www.greenfrogdesigns.co.uk
Printed on recycled paper
© green frog designs limited 2010
Page 3 of 5
