Attaching the antenna
To attach the antenna
screw into the connector on the rear
(see opposite).
For the best signal range, keep the antenna pointing up and away from the camera.
Inserting a MicroSD Card
If you are using a microSD card ensure that you
insert it before powering the camera
.
To insert the card, unscrew the screws underneath the camera to remove the panel. With
the card's pins facing the front of the camera, gently insert the card into the slot.
Powering up the camera
Plug in the power supply
into the trailing cable of the camera. Allow 30 seconds for the
camera to boot.
The reset button is only used during setup and for factory resets.
1. Camera Setup
Before mounting up the camera outside,
wire it up inside the house first
to make sure
everything is working as it should.
