Dia.12
Dia.13
Dia.14
Dia.15
Dia.16
Dia.17
Dia.18
Dia.19
Dia.20
Dia.21
MODIFYING OR ADDING
NEW PROGRAMMES
1. Press ‘PROG’ button and hold for approx 2
seconds, the display will show: (Dia.14).
2. Use ‘+’ or ‘-’ button to select the day
grouping which requires modifying or a new
day grouping for a new programme.
3. For modification press ‘PROG’ repeatedly to
arrive at the programme time requiring
modification then use ‘+’ or ‘-’ button to
make the change. Press ‘PROG’ repeatedly
again to arrive at the next time requiring
modification and use ‘+’ or ‘-’ button to
make the change.
ONE AND TWO HOUR BOOST
1. Pressing ‘-’ (Boost) once in normal
operating mode turns on for 1 hour period
(Dia.19).
2. Pressing ‘-’ (Boost) twice turns output on a
for 2 hour period (Dia.20).
3. Pressing ‘-’ (Boost) button three times
cancels the (Boost) ON period (Dia.21).
3. Press ‘TIME’ button then the icon ‘MON’ will
be flashing (Dia.12).
4. Use ‘+’ or ‘-’ button to select ‘TUE’, then press
‘TIME’ button twice to copy the data. The
display will show: (Dia.13).
(Example shown for copying data TUE to THU)
When the ON/OFF times for WED are set, the
display will show ‘THU’:- (Dia.11).
Dia.11
OPERATING MODE
Advance to next program
1. Use’+’ button to set the output mode.
ON
- Output to permanently ON and omit the program (Dia.15).
OFF
- Output to permanently OFF and omit the program (Dia.16).
ON AUTO
- Output to ON until next program OFF period (Dia.17).
OFF AUTO
- Output to OFF until next program ON period (Dia.18).
Note: If ‘+’ or ‘
-
’ button is held for more than 2
seconds, the selected time digit will add or
decrease quickly (about 5 steps per second), if
no key is pressed within 60 seconds the display
will return to operating mode.
PROGRAMMING THE
‘ON’/OFF’ TIMES
1. Press the ‘PROG’ button and hold for 2
seconds, after 2 seconds the display will show:
(example shows 7 Day setting
Dia.6)
3. Once the desired day grouping is selected,
press ‘PROG’ button to move onto
programming ON/OFF times. Display will
show PROG 1 ON, and the hour digits flashing
(24 hour clock) (Dia.7).
2. Use the ‘+’ or ‘-’ button to change the day
grouping (PROG) at the top of the display. This
will step through the following programming options:
7 DAY - MON TUES WED THU FRI SAT SUN
All of them have the same programming.
OR
5 DAY - MON TUE WED THU FRI
Are grouped as one group, and they will all have the same
programming. SAT and SUN will be programmed individually.
OR
INDIVIDUAL DAY -
Each day will have its program set individually. MON followed
automatically in programming by each of the other days. To copy
times set for an individual day to another day (e.g. copy Sat set
times to Sun), please see PROGRAM
DUPLICATION below.
4. Use the ‘+’ or ‘-’ to set the hours and the
‘PROG’ to change between hours and
minutes. Followed by ‘+’ or ‘-’ again to set the
minutes. Press ‘PROG’ to change to program
OFF time. (Dia.8)
5. Use the ‘+’ or ‘-’ to set the OFF time in the
same way as for PROG 1 ON time.
6. Press ‘PROG’ to scroll through program 2 ON,
program 2 OFF, program 3 ON, program 3 OFF,
program 4 ON, program 4 OFF, adding in times
as required. If you wish to omit programmes
just leave dashes in that ON/OFF location.
Press ‘PROG’ to move to the next linked day
(SAT follows the 5 day group automatically)
(Dia.9).
7. Set ON/OFF times as before. Press ‘PROG’ to
move to the next linked day (SUN follows the
SAT automatically) (Dia.10).
Dia.5
Dia.6
Dia.7
Dia.8
Dia.9
(Example shown is for 5 + 1 + 1 + day program)
Dia.10
8. Set ON/OFF times as before.
9. Once program 4 OFF has been set, press
‘PROG’ to exit program mode and
return to operating mode.
PROGRAM DUPLICATION
There are two copy functions: copy one day to another, or copy one day to all
other days. When programming for ‘Individual Day’ or ‘5 Day’ you can copy
the programmed data from one day to another day.
1. When setting ON time of ‘PROG’ 1, press ‘TIME’ button and then use ‘+’ or ‘-’
to select the day you want to copy.
2. Press ‘TIME’ button twice to copy the data of the selected day to current
day.
Or press ‘TIME’ button for 2 seconds to copy the data of the selected day to
the following days.
Note: Only ONE of the following
options can be used at one time.
